Â
|
Serial number |
Item |
Unit  |
Technical parameter |
|
|
1 |
Model |
/ |
5HXG-100,120,150 |
|
|
2 |
Type |
/ |
Batch circulation grain dryer |
|
|
3 |
Handling capacity(Moisture content of 22-24% of the maximum processing capacity) |
t |
Rice 10,12,15 |
|
|
4 |
Dimension (length×width×heighth) |
mm |
4100×2000×7210 |
|
|
5 |
Machine quality |
kg |
2150 |
|
|
6 |
Combustion engine |
/ |
Gun type spray |
|
|
7 |
Lighting mode of combustion engine |
/ |
Automatic lighting |
|
|
8 |
Fuel |
/ |
0#(diesel) |
|
|
9 |
Combustion consumption |
kg/h |
7.0-13.6 |
|
|
10 |
Exhaust fan type |
/ |
Centrifugal  |
|
|
11 |
The air volume of exhaust fan |
m³/h |
10800 |
|
|
12 |
Automatic control and safety equipment |
/ |
Automatic moisture meter, temperature control,air pressure switch, motor overload protection automatic shutdown |
|
|
13 |
Matched power |
Grain discharge motor |
kw |
0.015 |
|
Fan motor |
4 |
|||
|
Dusting motor |
0.09 |
|||
|
On the auger motor |
1.5 |
|||
|
  Under the auger motor |
0.75 |
|||
|
Circulation motor |
0.1 |
|||
|
14 |
Voltage |
v |
380 |
|
|
15 |
Drying capacity |
t%/h |
Rice 8-10 Wheat 7-10 |
|
|
16 |
nonuniformity of drying |
% |
≤1.0 |
|
|
17 |
Breakage rate appreciation |
% |
≤0.5 |
|
|
18 |
Crack rate |
% |
≤3.0 |
|
Â
Â
Â
1, Using horizontal multi-slot dryer section, grain crisscrossed loop cycle, hot exchange and evaporative way of drying to make sure the drying is evenly and fully;
2, Prevent drying crack broken rice we adopt constant drying speed control, precipitation rate and air temperature controlled by computer, without manual settings;
3, Prevent grain deterioration of the grain, machine running under proper temperature ;
4, Prevent excessive drying adopting automatic, accurate and safe water monitoring devices, it can be shut down automatic;
5, Body of tower is low and compact, easy to be installed;
6, High moisture rice and wheat quality also can be dried, widely used for rice, wheat, corn, soybeans and other crops;
7, Safe, reliable, easy to be cleaned;
8, A variety of fuels available, economic, environmentally friendly;
9, Easy to maintain, convenient to use;
10, Excellent quality raw materials for drying tower body, more durable.
Machine specification details as below:
The front end of the car is fitted with bumper, which not only has decorative function, but also is a safety device that absorbs and moderates the external impact force to protect the body and the occupant.
At present, in addition to maintaining the original protection function of the car front and rear bumper, but also the pursuit of harmony and unity with the body shape, the pursuit of its own lightweight car front and rear bumper are made of plastic, people called plastic bumper.
The plastic bumper is made of plastics, mainly polyester and polypropylene, which are made by injection molding. For example, the bumper of Peugeot 405 car is made of polyester and made by reaction injection molding. Volkswagen audi 100 Golf Shanghai Santana Tianjin xiali model car bumpers, adopted polypropylene materials made from injection molding in Abroad have a called polyethylene carbon ester plastic, seeping into alloy composition, using the method of metal injection molding processing of bumper not only has high strength, rigid, also has the advantages of can welding and coating performance is good, in the amount of cars more and more.
Plastic Bumper Black,Black Plastic Bumper ,Best Plastic Bumper,Car Bumper Mould
Taizhou Huangyan Xingtai Plastic Mould Co., Ltd. , https://www.xingtaimould.com