The China Automotive Network Sewage Sewage Vehicles Catalog contains a total of seven categories of 115 manufacturers, 107 Sewage Cart brands, 838 Sewage Carts, and the latest Sewage Cart Bulletins, Environmental Notices. , fuel announcements, exemption announcements, pictures, news, and the most timely information on price quotes for sewer trucks.
Sewage suction vehicle is a new type of sanitation vehicle that collects and transfers cleaning sludge and sewage to avoid secondary pollution. Sewage suction trucks can be self-priming, self-priming, fast working, large capacity, convenient transportation, and suitable for collection. Transportation of feces, mud, crude oil and other liquid substances.
Dongfeng Sewage Sewer Category Cassidy Sewage Suck Dolica Sewage Cart Sanping Diesel Pump 140 Sewage suction car 145 sewage suction truck 153 Sewage suction truck 1208 Sewage Suppressor Dongfeng Sewage Suppressor Function Dongfeng Sewage Suppressor Sewage Suppressor Special parts include power take-off device, drive shaft, vacuum suction pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, scat window, Hand washing device, etc., equipped with high-power vacuum pump and high-quality hydraulic system, tank head one-time die-casting, can open after the tank, double top dumping. The dirt in the tank can be dumped directly through the rear cover, with a high degree of vacuum (more suction than a suction truck), large tonnage, high efficiency, and a wider range of uses. Dongfeng Sewage Suppressor consists of oil separator, water separator, special vacuum suction pump, volume pressure gauge, pipe network system, suction pipe, gravity valve, vacuum tank, communicating device (stem window), fully automatic protection Overflow valve, hydraulic kit. Sewage suction truck working principle Because the suction hose is always immersed in the liquid surface, the air in the fecal tank is sucked, and it becomes thinner and thinner because it cannot be supplemented. As a result, the pressure in the tank is lower than the atmospheric pressure. Under atmospheric pressure, the suction hose enters the tank. Or because the siphon tube is close to the bottom of the tank, when the air is continuously discharged into the manure tank, it is compressed because it has no way out. As a result, the pressure in the tank is higher than the atmospheric pressure. The manure fluid is discharged through the siphon tube and the suction hose under the action of the compressed air. Outside the tank. Sewage suction vehicles have features such as high suction efficiency, self-priming, self-discharging, and direct irrigation. Filling the manure tank time: ≤ 5min, suction process: ≥ 8m. According to the characteristics of long service life, fast working speed, easy operation and convenient transportation. The main purpose of the sewage suction truck The sewage suction truck is mainly used to clean the city sewers, the pipeline sediments, the dredge of the dead mud, can also be used to clean industrial drainage pipelines, walls, etc., and can also be used for watering, transporting water and highways. It can be used to save fire in case of emergency. Buy 1, pay attention to the quality of the sheet, vacuum sealing, poor material can easily cause deformation of the tank and other issues. 2. The choice of vacuum kit, the pressure capacity and the perception of temperature difference. The domestic kit debuts Veyron products. 3, After the choice of lid, according to the local operating environment, temperature and other choices. 4. According to the relevant regulations of the National Development and Reform Commission on the enforcement of the three-gas emission from the country, the National 2nd vehicle parameter data has been deleted since July 1, 2008. Please pay attention to identifying the country's 3 emissions labels and related procedures when purchasing vehicles.
Dongfeng XBW Sewage Cart (3 cubic meters)
Transport medium: liquid dirt, density: 800 kg/m3, effective volume of the tank: 2.5 cubic meters; dimensions of the tank (linear section length × diameter) (mm): 3000 × 1050; optional cab with chassis. The number of quasi-passengers in the cab was 2,3 and the corresponding rated load (kg) 1980, 1915. Protective material: Q235 carbon steel, connection method: the left and right side and the lower part of the protection are welded connection, the rear protection section size (mm): 120 × 50 × 5, rear protection from the ground (mm): 400. Sewage truck special function description: 1. Sewage suction pump special parts include vacuum suction pump, power take-off device, transmission shaft, water and gas separator, oil and gas separator, multi-way reversing valve, tank body, blowdown valve, visual window, vacuum pressure gauge, Pipe network system, hydraulic system and other components. 2. The use of high-quality carbon steel as the material of the sewage tank can be selected from stainless steel and steel liner. Tank metal paint. 3. The sewage suction truck shall be equipped with an imported anti-overflow device to prevent feces and sewage from being sucked and poured into the vacuum pump system. 4. The sewage suction truck has a hydraulic lifting and dumping function to facilitate the dumping of various sludges. Moreover, the rear tank door can be automatically opened hydraulically, which is convenient for cleaning deposits, solidification in the tank body, and maintenance and maintenance of the interior of the tank body. 5. Sewage suction truck can be self-priming, self-priming, convenient suction and drainage. Sewage suction truck has all the functions of suction truck. It has higher vacuum, higher suction distance and higher pressure than suction truck, which can meet the users in different use environments. use. The volume of the sewage suction tank body can vary from 2 to 15, and the size and model of the tank can be selected according to the needs of different customers. The first is to introduce the 2-4 cubic model, which can mainly use Dongfeng Furika, Foton Era, Jiangling Shunda and other small trucks. The vacuum pump can choose the well-known domestic brands Hangzhou Veyron pump 45/7000 models, and we Suizhou The real estate of Suizhou Weiye 5 tons of pumps, or Suizhou Yifeng vacuum pump, model XD-185, or XD-240, Suizhou real estate advantage is more timely service. [1] 6-8 cubic sewage suction truck can choose the chassis has Dongfeng Tip 140, Dongfeng Dolika, Dongfeng flat head 145 series, generally the front can both achieve a maximum of 6 cubic volumes, respectively, can use the vacuum pump Hangzhou Wei Long pump 68/7000 model, Suizhou Weiye pump 8 tons pump, and Suizhou Yifeng vacuum pump X-350 model, 10 square volume models have Dongfeng Tianjin series, Dongfeng 153 models, the use of the vacuum pump can use double pump Wei Long 45/7000 two, Suizhou Weiye 10 tons pump, Suizhou Yifeng pump XD-420. The 15 cubic sewage suction trucks are generally selected from the Hangzhou Veyron pump 45/4000 models. The main advantage of this pump is that the suction pump is larger than the normal pump because it uses the imported rotary vane. The medium that can be pumped by this kind of special vehicle is also very extensive. Drainage, sewage, and silt in hydropower plants, pig manure with low moisture content are all without any problems. It should be noted that when using this special vehicle, it must be operated according to the standard operating mode. It is not free to operate so as to avoid unnecessary troubles of the vehicle.
Sewage suction vehicle is a new type of sanitation vehicle that collects and transfers cleaning sludge and sewage to avoid secondary pollution. Sewage suction trucks can be self-priming, self-priming, fast working, large capacity, convenient transportation, and suitable for collection. Transportation of feces, mud, crude oil and other liquid substances.
Dongfeng Sewage Sewer Category Cassidy Sewage Suck Dolica Sewage Cart Sanping Diesel Pump 140 Sewage suction car 145 sewage suction truck 153 Sewage suction truck 1208 Sewage Suppressor Dongfeng Sewage Suppressor Function Dongfeng Sewage Suppressor Sewage Suppressor Special parts include power take-off device, drive shaft, vacuum suction pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, scat window, Hand washing device, etc., equipped with high-power vacuum pump and high-quality hydraulic system, tank head one-time die-casting, can open after the tank, double top dumping. The dirt in the tank can be dumped directly through the rear cover, with a high degree of vacuum (more suction than a suction truck), large tonnage, high efficiency, and a wider range of uses. Dongfeng Sewage Suppressor consists of oil separator, water separator, special vacuum suction pump, volume pressure gauge, pipe network system, suction pipe, gravity valve, vacuum tank, communicating device (stem window), fully automatic protection Overflow valve, hydraulic kit. Sewage suction truck working principle Because the suction hose is always immersed in the liquid surface, the air in the fecal tank is sucked, and it becomes thinner and thinner because it cannot be supplemented. As a result, the pressure in the tank is lower than the atmospheric pressure. Under atmospheric pressure, the suction hose enters the tank. Or because the siphon tube is close to the bottom of the tank, when the air is continuously discharged into the manure tank, it is compressed because it has no way out. As a result, the pressure in the tank is higher than the atmospheric pressure. The manure fluid is discharged through the siphon tube and the suction hose under the action of the compressed air. Outside the tank. Sewage suction vehicles have features such as high suction efficiency, self-priming, self-discharging, and direct irrigation. Filling the manure tank time: ≤ 5min, suction process: ≥ 8m. According to the characteristics of long service life, fast working speed, easy operation and convenient transportation. The main purpose of the sewage suction truck The sewage suction truck is mainly used to clean the city sewers, the pipeline sediments, the dredge of the dead mud, can also be used to clean industrial drainage pipelines, walls, etc., and can also be used for watering, transporting water and highways. It can be used to save fire in case of emergency. Buy 1, pay attention to the quality of the sheet, vacuum sealing, poor material can easily cause deformation of the tank and other issues. 2. The choice of vacuum kit, the pressure capacity and the perception of temperature difference. The domestic kit debuts Veyron products. 3, After the choice of lid, according to the local operating environment, temperature and other choices. 4. According to the relevant regulations of the National Development and Reform Commission on the enforcement of the three-gas emission from the country, the National 2nd vehicle parameter data has been deleted since July 1, 2008. Please pay attention to identifying the country's 3 emissions labels and related procedures when purchasing vehicles.
Dongfeng Jinba Sewage Suck
Dongfeng XBW Sewage Cart (3 cubic meters)
| The main technical parameters of the product | |||
| product name: | Dongfeng bully sewage suction car | Dimensions: | 5995X2000X2550(mm) |
| Chassis model: | EQ1060TJ20D3 | Carriage size: | XX (mm) |
| Total quality: | 6495 (Kg) | Approach/Departure angle: | 19/14(°) |
| Rated quality: | 1980, 1915 (Kg) | Front suspension and rear suspension: | 1032/1663(mm) |
| Maintenance quality: | 4385 (Kg) | The maximum speed: | 90 (km/h) |
| Vehicle remarks: | Transport medium: liquid dirt, density: 800 kg/m3, effective volume of the tank: 2.5 cubic meters; dimensions of the tank (linear section length × diameter) (mm): 3000 × 1050; optional cab with chassis. The number of quasi-passengers in the cab was 2,3 and the corresponding rated load (kg) 1980, 1915. Protective material: Q235 carbon steel, connection method: the left and right side and the lower part of the protection are welded connection, the rear protection section size (mm): 120 × 50 × 5, rear protection from the ground (mm): 400. | ||
Honeycomb Paper Making Machine
Honeycomb Paper Making Machine
Flying Man Honeycomb paper making cutting machine is suitable for the production of 70-170 grams of Kraft honeycomb wrapping paper, shock absorber fishing net paper.
Kraft Wrapping Paper Making Machine is cut for honeycomb paper, which is eco-friendly and cost-effective alternative for plastic bubble wrap cushioning. It is easy to stretch, softer and more flexible, provide cushion protect without surface scratch. Finished products from this machine can be used to pack fruits, flowers, ceramics, glassware, etc.
Honeycomb Paper Machine,Honeycomb Paper Making Machine,Kraft Wrapping Paper Making Machine,Kraft Honeycomb Paper Cushion Making Machine
Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com