Details
Specification
| Specification | DW130NC |
| Maximum bending pipe diameter x thickness ( steel ) | Φ130×8 |
| The largest bending angle | 190° |
| Max effective distance of mandrel(3) | 4500mm |
| Max bending radius | 520mm |
| Pipe bending precision | ± 1° |
| Max. bending speed | 30°m/s  |
| Motor power | 22KW |
| Max hydraulic pressure | 14MPa |
| Each can be set the number of elbows | 16 |
| Number of Fittings | 16×16 |
| Measurement size of machine | 6000×1600×1600mm |
| Weight of machine | 8000Kg |
| Warranty | 1Year / Life-Long Maintenance |
feature:Â
1. Electric control system: world-renowned controllers are applied. For example, servo drivers, servo motors, positioning modules and CPU produced by Mitsubishi, Yaskawa and Delta are applied and they have strong performance and excellent stability.
2. Ultra-large CPU that can hold the edition of 400 groups of archives is applied. If it is not sufficient, transmission software can be purchased and installed for the computer. The archives can be stored in hard disk to expand the number of edit groups infinitely. (Optional)
3. WINDOWS operating system is installed in industrial computer to be mated with servo system, so it not only has the servo drive feature, but also has the archives management convenience brought by WINDOWS operating system. The archives can also be stored in hard disk or soft disk to expand the number of edit groups infinitely.
4. It can detect the error and fault automatically and display them on screen, so that the operator can eliminate the failures easily.
5. All processing data is input through the touch screen and each elbow can set compensation value, speed and demould clearance according to different materials.
6. For same tube, each elbow can have 5 action sequences and 10 sections of speed independently for operation of operators. Besides, the work efficiency can be improved and tube interference point can be reduced.
7. Chinese and English on the touch screen can be switched and the products can also be ordered according to requirements if it is another language on the screen. (Optional)
8. Materials can be delivered directly or wrapped according to requirements and XYZ coordinates can be switched to YBC processing values automatically.
9. After the completion of data editing, the data will be protected by password to prevent unapproved alteration of the data. (Optional)
10. Heat exchanger is provided for the electric control system for automatic heat dissipation. If required, NC air conditioner can be purchased to ensure service life of electric control system. (Optional)
11. The machine is provided with automatic oil injection system to reduce friction of elbow and ensure quality of elbow. (Optional)
12. The machine can be connected to a printer to print all data on the screen. (Optional)
13. Communication interface and data unit can be provided for the machine, for which the network line will be connected to Liye and engineer will conduct remote operation and control, immediate monitoring, software updating and trouble removal, etc. (Optional)
14. The feed position of feed trolley, the interference position of safety device and digital module and interference position of guide mould can be fine adjusted manually and memorized automatically to eliminate the error of manual measurement and losses caused by machine collision.
15. The feed shaft will be detected automatically before action so that it can be prevented from colliding with the machine.
16. Action segments can be selected during actual bending to observe interference points and modification work and improve efficiency.
Parts brand
Company information
Â
Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press.
Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.
Packing and shipping
Details
Specification
| Specification | DW130NC |
| Maximum bending pipe diameter x thickness ( steel ) | Φ130×8 |
| The largest bending angle | 190° |
| Max effective distance of mandrel(3) | 4500mm |
| Max bending radius | 520mm |
| Pipe bending precision | ± 1° |
| Max. bending speed | 30°m/s  |
| Motor power | 22KW |
| Max hydraulic pressure | 14MPa |
| Each can be set the number of elbows | 16 |
| Number of Fittings | 16×16 |
| Measurement size of machine | 6000×1600×1600mm |
| Weight of machine | 8000Kg |
| Warranty | 1Year / Life-Long Maintenance |
feature:Â
1. Electric control system: world-renowned controllers are applied. For example, servo drivers, servo motors, positioning modules and CPU produced by Mitsubishi, Yaskawa and Delta are applied and they have strong performance and excellent stability.
2. Ultra-large CPU that can hold the edition of 400 groups of archives is applied. If it is not sufficient, transmission software can be purchased and installed for the computer. The archives can be stored in hard disk to expand the number of edit groups infinitely. (Optional)
3. WINDOWS operating system is installed in industrial computer to be mated with servo system, so it not only has the servo drive feature, but also has the archives management convenience brought by WINDOWS operating system. The archives can also be stored in hard disk or soft disk to expand the number of edit groups infinitely.
4. It can detect the error and fault automatically and display them on screen, so that the operator can eliminate the failures easily.
5. All processing data is input through the touch screen and each elbow can set compensation value, speed and demould clearance according to different materials.
6. For same tube, each elbow can have 5 action sequences and 10 sections of speed independently for operation of operators. Besides, the work efficiency can be improved and tube interference point can be reduced.
7. Chinese and English on the touch screen can be switched and the products can also be ordered according to requirements if it is another language on the screen. (Optional)
8. Materials can be delivered directly or wrapped according to requirements and XYZ coordinates can be switched to YBC processing values automatically.
9. After the completion of data editing, the data will be protected by password to prevent unapproved alteration of the data. (Optional)
10. Heat exchanger is provided for the electric control system for automatic heat dissipation. If required, NC air conditioner can be purchased to ensure service life of electric control system. (Optional)
11. The machine is provided with automatic oil injection system to reduce friction of elbow and ensure quality of elbow. (Optional)
12. The machine can be connected to a printer to print all data on the screen. (Optional)
13. Communication interface and data unit can be provided for the machine, for which the network line will be connected to Liye and engineer will conduct remote operation and control, immediate monitoring, software updating and trouble removal, etc. (Optional)
14. The feed position of feed trolley, the interference position of safety device and digital module and interference position of guide mould can be fine adjusted manually and memorized automatically to eliminate the error of manual measurement and losses caused by machine collision.
15. The feed shaft will be detected automatically before action so that it can be prevented from colliding with the machine.
16. Action segments can be selected during actual bending to observe interference points and modification work and improve efficiency.
Parts brand
Company information
Â
Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press.
Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.
Packing and shipping
A Heat Exchanger Unit is a device used to transfer thermal energy (heat) between two or more fluids. Heat exchangers are used in a wide variety of applications, such as heating and cooling of buildings, industrial processes, and power generation.
The heat exchanger unit essentially consists of heat exchangers such as Plate Heat Exchanger, Shell and Plate Heat Exchanger, or other counterpart, a circulating pump, a fluid make-up pump, thermometers, a filter, sensors, a pipeline and valves. It is also possible to design a temperature control system, pressure stabilization system, variable-frequency controller, heat metering and communication controller, etc. according to the client`s requirements.
Big advantage of heat exchanger unit is that, by adopting a modularized structure, it maximizes each component`s function to the most. The precise control for heat exchange process also saves time and efforts for maintenance and installation.
Feature is that intelligent control, excellently energy-saving, high automation and easy to operate, high cost performance and wide application.
Heat Exchanger Unit,Heat Exchanger Ac Unit,Heat Exchanger Package Unit,Heat Recovery Ventilation Unit
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com