Wheel loader LQ966H
1. Heavy duty, powerful
2. Torque converter and counter-shaft trnsmission gearbox-Komatsu technology, assembled separately, higher reliability and easier maintenance
3. Pilot controlled, fully hydraulic steering system, power shift transmission, easier operation
4. Bucket can be leveled automatically, optimized working device, higher productivity
5. Comfortable operation environment, new design cabin, Grammer seat, air-conditioner at option
6. Various working devices of attachment are available, such as log clamp, pipe clamp, grass fork, plow, ore bucket, loose bucket, fork etc, to meet different needs.
| SPECIFICATIONS Â LQ966H | |
| Rated capacity | 3.2m 3 |
| Rated   weight | 6000Kg |
| Operating weight | 19000Kg |
| Performance of bucket being set level | Yes |
| Static tilting load at full steering position | 98KN |
| Max. breakout force | 200KN |
| Max. drawbar pull | 151.9KN |
| Max. grade ability | 30° |
| Total of three time: lifting/dumping/lowering | 11.3s |
| Max. dump height | 3400mm |
| Max. dump reach | 1198mm |
| Min. ground clearance | 450mm |
| Wheel base | 3200mm |
| Overall dimensions(length*width*height) | 8360*2950*3600mm |
| Pattern | Inline, water cooled, Â dir. inject, fourstrokees |
| Cylinder-bore*stroke | 6-126*130 |
| Max. torsion | 779Nm |
| Model of engine | STEYR WD10G240E21 |
| Rated power | 175KW |
| Min. fuel consuming rate | 214g/kw. h |
| Specified rotational speed | 2200r/min |
| Model of torque device | YJ375 |
| Pattern | 3-element, single stage |
| Number of great shift | 4 forward, 4 revers |
| Max. travel speed | 38km/h |
| Main reducer type | Spiral bevel gear, Â moderationof first stage |
| Pattern of wheelside moderation | Single stage planetary |
| Type size | 23.5-25 |
| Front type pressure | 392KPa |
| Rear type pressure | 343KPa |
| Pattern | Articulated and hydraulic steering, load sensing meets |
| Steering angle(each direction) | 35± 1 |
| Min. turning radius(outside of bucket) | 7268mm |
| Valve distributing working | DF32@ 2C |
| Working pumps | CBG3100 |
| Brake system | Air assisted oil type four wheel brake |
| Parking brake | Air cutting control inner expand hoof |
| Fuel capacity | 320L |
| Pressure of working hydraulic system | 160kfg/cm 2 |
Warranty &Service
Â
1) We have 1 year warranty from the date of receiving the loaders.
2) During Warranty, if there is any part broken , we will send good and new parts for your replacements.
3) If out of warranty, we can provide 5+ years spare parts for you
4)We are 24 hours online, if you met some situation in a hurry, then contact with us anytime as you like, we will solve it as soon as possible.Â
Exhibition
We Are Only Produce The Best Wheel Loader ! !
Â
Contact me right now for more information!  Online 24 hours a day!Â
Â
Gantry Flame CNC Cutting Machine
Advantages and features:
Automatic igniting and tempering control, high efficient and quick. Can be linear single, double - sided a molding groove cutting.
Brand: Buluoer intelligent
Other name: Gantry flame plasma CNC cutting machine
Cutting mode: flame cutting, Plasma cutting
Suit material: carbon steel, manganese plate, galvanized plate, stainless steel, copper steel, aluminium plate etc. metal plate materials.
Product describe:
This CNC equipment is aimed at metal plate materials baiting, not only the appearance of atmospheric but also stable operating, high working efficiency, long service life and it can be achieved cutting all kinds of design graphic. Widely used in various machine building industry of metal sheet cutting.
Product features:
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can remote operation, convenient and efficiency, save labour.
Automatic temper control, safety and efficiency.
Full-automatic StarCAM/ FastCAM graphical editing software, simple nesting.
Flame/plasma dual-purpose cutting system, easy to operate and wide application range.
System has self-compensating, automatic positioning, automatic height-adjustment, break-point memory and automatic recovery function.
Cutting size customization, flame plasma sub-cutting options.
Product parameters
|
Type |
BLDH-3060 |
BLDH-4080 |
BLDH-5080 |
BLDH-60100 |
BLDH-80100 |
|
Track gauge(mm) |
3000 |
4035 |
5000 |
6000 |
8000 |
|
Effective cutting width(mm) |
2300 |
3300 |
4300 |
5300 |
7300 |
|
Machine width(mm) |
3500 |
4300 |
5500 |
6500 |
8500 |
|
Track length(mm) |
6000 |
8000 |
8000 |
10000 |
10000 |
|
Number of standard cutting torch(set) |
1 |
2 |
2 |
2 |
2 |
|
Input power |
AC380V/50Hz;AC220V/50Hz |
||||
|
Lift(mm) |
200 |
||||
|
Cutting thickness(mm) |
Flame cutting:5-150 Plasma cutting:1-30(According to the power supply size) |
||||
|
Cutting speed (mm/min) |
Flame cutting:100-1000 Plasma cutting:450-5000 |
||||
|
Idle speed |
0-8000 |
||||
|
Drive mode |
Bilateral drive |
||||
|
System |
Shanghai Jiaoda or Beijing Starfire |
||||
|
Operating accurancy |
±0.5mm |
||||
|
According to the power supply size |
|||||||
|
LGK-120IGBT |
LGK-200IGBT. |
||||||
|
No. |
Name |
Specification parameter |
Rrmark |
Specification parameter |
Rrmark |
||
|
1 |
Track gauge |
4.0m |
Transverse efffective cutting max. 3 m |
4.0m |
Transverse efffective cutting max. 3 m |
||
|
2 |
Track length |
8.0m |
longitudinal efffective cutting max. 6.5 m |
8.0m |
longitudinal efffective cutting max. 6.5 m |
||
|
3 |
Max. idle speed |
9000min |
|
9000mm/min |
|
||
|
4 |
Straight line position accuracy |
±0.2min |
|
±0.2mm |
|
||
|
5 |
Straight line position repeat accuracy |
±0.3mm |
|
±0.3mm |
|
||
|
6 |
Operating accurancy |
±0.5mm |
|
±0.5mm |
|
||
|
7 |
Height controller lift distance |
200mm |
|
150mm |
|
||
|
8 |
Flame punch cutting thickness |
6-80mm |
Carbon steel plate |
6-80mm |
Carbon steel plate |
||
|
9 |
Flama max. Cutting thickness |
200mm |
Carbon steel plate |
200mm |
Carbon steel plate |
||
|
10 |
Plasma punch cutting thickness |
16mm |
Stainless steel plate, carbon steel plate |
25mm |
Stainless steel plate, carbon steel plate |
||
|
11 |
Plasma max. Cutting thickness (Edge cutting) |
25mm |
Stainless steel plate, carbon steel plate |
40mm |
Stainless steel plate, carbon steel plate |
||
|
12 |
Inclination of plasma cutting surface |
5-8° (carbon steel plate) |
5-8°(carbon steel plate) |
|
|||
|
13 |
Roughness of plasma surface |
Ra12.5 |
Ra12.5 |
|
|||
|
14 |
Roughness of flame surface |
Ra25 |
Ra25 |
|
|||
|
15 |
Speed of plasma cutting |
50-4000mm/min |
50-4000mm/min |
|
|||
|
16 |
Speed of flame cutting |
50-700mm/min |
50-700mm/min |
|
|||
|
17 |
Drive mode |
Bilateral drive |
Bilateral drive (panasonic servo) |
|
|||
|
18 |
Number of cutting torch |
CNC flame cutting torch: 1, plasma cutting torch: 1 |
CNC flame cutting torch: 1, plasma cutting torch: 1 |
|
|||
|
19 |
Equipment accurancy |
Conformed or superior to ISO8206-1991, JB/T10045.3-1999 |
Conformed or superior to ISO8206-1991, JB/T10045.3-1999 |
|
|||
Flame plasma CNC cutting machine
Basic Equipment
|
No. |
Name |
Distribution |
Unit |
Quantity |
Remark |
|
1 |
Type specification |
BLDH4080 |
set |
1 |
Beam annealing |
|
2 |
Drive mode |
double-drive |
set |
2 |
Panasonic servo |
|
3 |
Drive reducer |
AEVELE |
set |
2 |
Taiwan |
|
4 |
CNC |
F2300TB |
set |
1 |
Shanghai Jiaoda |
|
5 |
FASTCAM |
Fast CAM Chinese version |
set |
1 |
Guoyou |
|
6 |
Flame cutting torch |
Wuxi Xiangzheng |
set |
1 |
Guoyou |
|
7 |
Plasma power |
Chengdu Huayuan LGK200 |
set |
1 |
Huayuan |
|
8 |
Arc voltage regulator |
Shanghai Jiaoda |
set |
1 |
system-provided |
|
9 |
Automatic ignite device |
Wuxi Xiangzheng |
set |
1 |
Guoyou |
|
10 |
Precision track |
24 kg |
m |
8*2 |
Wuxi |
|
11 |
Precision rack |
Straight tooth |
m |
6*2 |
Wuxi |
|
12 |
Pulley |
Nylon chain |
set |
1 |
|
|
13 |
Lift body |
2K2M |
piece |
2 |
|
Technical requriments
|
No. |
Name |
Distribution |
Remark |
|
1 |
Width of machine tool |
4000 |
|
|
2 |
Effective cutting wideth |
3100 |
|
|
3 |
Track gauge |
3710 |
|
|
4 |
Idle speed |
0~8000 mm |
|
|
5 |
Flame cutting thickness |
5~200 mm |
|
|
6 |
Plasma punch cutting thickness |
25mm |
user demand |
|
|
Plasma max. Cutting thickness |
45mm |
user demand |
|
7 |
Effective length |
6500 mm |
|
|
8 |
Cutting torch journey |
≤150 mm |
|
|
9 |
Accurancy |
± 0.5 mm |
|
|
10 |
Track length |
8m |
|
|
11 |
Input power |
AC220V/380V 50HZ |
|
|
12 |
automatic height-adjustment |
Jiaoda arc voltage height-adjustment |
|
|
13 |
Cutting material |
Stainless steel plate, carbon steel plate |
|
Cutting samples
Flame Cutting Machine,Plasma Cutting Equipment,Copper Cnc Cutting Machine,Cnc Plasma Slab Cutting Machine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com