Model NO.: YR-V-20180904A
Customized: Customized
Trademark: Yurui
Transport Package: Bulk Packing
Specification: 560CBM
Origin: China
HS Code: 8474809010
Model NO.: YR-V-20180904A
Customized: Customized
Trademark: Yurui
Transport Package: Bulk Packing
Specification: 560CBM
Origin: China
HS Code: 8474809010
Equipment Parameter
Output |
2million -30million sqm/year (based on thickness 9.5mm) |
Fuel |
coal; natural gas; diesel; heavy oil, etc |
Technology |
hot ai; heat transfer oil/thermal oil |
Width |
1200mm,1220mm |
Thickness |
6mm to 22mm |
Length |
1500mm-3000mm |
Raw material |
Natural gypusm powder  ,phosphorus gypsum powder,Desulfurized gypsum powde |
Â
Flow chartÂ
Raw material request
| Raw materials | Item | Specification |
|
Calcined gypsum powder |
Fineness |
0.2mm,<10% 0.2mm,Remnant<10% |
|
Initial set time |
3.5-5.5 3.5-5.5 minutes |
|
|
Final set time |
7.5-10.5 7.5-10.5 minutes |
|
|
Crystal water |
4.5%-5% | |
|
Half-water gypsum powder |
>65% | |
| (2) Bending strength (2 hours) |
1.8 Mpa | |
|
Paper |
Weight |
190-220g/ |
|
Thickness |
0.36-0.4mm | |
|
Air permeability |
0.85-1.6μm/pas | |
| (Cobb) Water absorption( Cobb ) |
15-30g/ | |
|
Tensile strength |
12.5 KN/m,3.5 KN/m Portrait 12.5 KN/m, transverse 3.5 KN/m |
|
|
Transverse expansion and contraction |
<2% | |
|
Moisture |
10%±2 | |
|
Denaturized starch |
Content of the starch |
>70% |
| Moisture | 11%-13% | |
| PH | 6.5-7.5 | |
| Protein | <0.3% | |
| 20ºC-40ºC Solubility in 20ºC-40ºC water |
73%-78% | |
|
Foaming agent |
Condensate |
>30% |
|
Ligarine |
<3% | |
|
Inorganic salts |
>2.5% | |
| PH | 7-9 | |
| water Water |
PH | 6.5-7.5 |
Factory view
Equipment advantageÂ
1.Fine workmanship, high precision, reliable quality, beautiful appearance
2.Accurate dosing for each raw material. Starch mixing tank use stainless steel, with long service life and low corrosive.The foaming agent reserve tank is made of stainless steel. Foaming system adopts domestic advanced technology-Dynamic and static foaming system, ensuring the finished board is lightweight, good bending strength and saving much cost.
3.The cutting machine uses dual-serve motor, only1 mm gap between cutting saw, saving cost .
4.Drying system: using heat conduction oil furnace as heat source, the hot oil will be exchanged to hot air by the fin type heat exchanger, then the hot air enters the drying room through the fan, to work together with the heat conduction oil pipe to dry the gypsum board. Â There are totally 3 drying zones, can perfectly finish the drying curve, avoid the over-burning or not dry enough. This technology is environmental, energy saving, high thermal efficiency, process parameters and is easy to control.
5. High electrical automation degree, low failure rate, less workers.
6.Forming system: forming belt 14mm thick, can improve the flatness of gypsum board. The wet board cutting machine uses frequency conversion code cutting technology, so can ensure the length tolerance to be mm.
Â
Labor requirements
| System | Workers needed |
| Dosing.mixing material system | 2/ Â 1workers/shift |
| PLC control | 1/ Â 1workers/shift |
| Forming system | 1/ Â 1 worker/shift |
| #2 #1Horizontal conveying system | 1/ Â 1 worker/shift |
| Drying system | 1/ Â 1 worker/shift |
| Boiler heating system | 2/ 1 worker/shift |
| Substitute person | 1Â 1 worker |
| \Â Monitor\Â forklift | 2/ Â 2Â worker/shift |
| Package | 3-5Â 3-5Â worker |
| Total | 13-15/ Â 13-15workers/shift |
Â
Company introduceÂ
Products
Shandong Yurui International is specialized in designing and manufacturing gypsum board production line, mgo board production line, lightweight EPS cement wall panel production line.
Experience
Our general engineer has over 20years experience in mechanical industry, proficient in the newest machinery design/manufacturing. Other main engineers all have over 10years experience .With rich experience in mechanical design and manufacturing, professional import and export services, we commitment to provide the best integrated solutions of production line for customers.
Promise
After installation and commissioning, we will provide technical formula suitable with client's demand, ensuring clients can produce qualified finished products. Additionally, we will help local experienced engineers for one year to master the production process.Our professional sales team, designing team, manufacturing team, installation team, process team, service team, promises you a 100% perfect project.
Shandong Yurui International is specialized in designing and manufacturing gypsum board production line, mgo board production line, lightweight EPS cement wall panel production line.
Experience
Our general engineer has over 20years experience in mechanical industry, proficient in the newest machinery design/manufacturing. Other main engineers all have over 10years experience .With rich experience in mechanical design and manufacturing, professional import and export services, we commitment to provide the best integrated solutions of production line for customers.
Promise
After installation and commissioning, we will provide technical formula suitable with client's demand, ensuring clients can produce qualified finished products. Additionally, we will help local experienced engineers for one year to master the production process.Our professional sales team, designing team, manufacturing team, installation team, process team, service team, promises you a 100% perfect project.
Â
Our Service
1. Full life-cycle value services: Our company provides gypsum board production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support
2. All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.
1. Full life-cycle value services: Our company provides gypsum board production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support
2. All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
3.Complete data specification:Â Provide production line equipment technical data and instructions,
4. Quality commitment: The company regards product quality as the lives of enterprises, the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology.so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.
Â
Â
Equipment Parameter
Output |
2million -30million sqm/year (based on thickness 9.5mm) |
Fuel |
coal; natural gas; diesel; heavy oil, etc |
Technology |
hot ai; heat transfer oil/thermal oil |
Width |
1200mm,1220mm |
Thickness |
6mm to 22mm |
Length |
1500mm-3000mm |
Raw material |
Natural gypusm powder  ,phosphorus gypsum powder,Desulfurized gypsum powde |
Â
Flow chartÂ
Raw material request
| Raw materials | Item | Specification |
|
Calcined gypsum powder |
Fineness |
0.2mm,<10% 0.2mm,Remnant<10% |
|
Initial set time |
3.5-5.5 3.5-5.5 minutes |
|
|
Final set time |
7.5-10.5 7.5-10.5 minutes |
|
|
Crystal water |
4.5%-5% | |
|
Half-water gypsum powder |
>65% | |
| (2) Bending strength (2 hours) |
1.8 Mpa | |
|
Paper |
Weight |
190-220g/ |
|
Thickness |
0.36-0.4mm | |
|
Air permeability |
0.85-1.6μm/pas | |
| (Cobb) Water absorption( Cobb ) |
15-30g/ | |
|
Tensile strength |
12.5 KN/m,3.5 KN/m Portrait 12.5 KN/m, transverse 3.5 KN/m |
|
|
Transverse expansion and contraction |
<2% | |
|
Moisture |
10%±2 | |
|
Denaturized starch |
Content of the starch |
>70% |
| Moisture | 11%-13% | |
| PH | 6.5-7.5 | |
| Protein | <0.3% | |
| 20ºC-40ºC Solubility in 20ºC-40ºC water |
73%-78% | |
|
Foaming agent |
Condensate |
>30% |
|
Ligarine |
<3% | |
|
Inorganic salts |
>2.5% | |
| PH | 7-9 | |
| water Water |
PH | 6.5-7.5 |
Factory view
Equipment advantageÂ
1.Fine workmanship, high precision, reliable quality, beautiful appearance
2.Accurate dosing for each raw material. Starch mixing tank use stainless steel, with long service life and low corrosive.The foaming agent reserve tank is made of stainless steel. Foaming system adopts domestic advanced technology-Dynamic and static foaming system, ensuring the finished board is lightweight, good bending strength and saving much cost.
3.The cutting machine uses dual-serve motor, only1 mm gap between cutting saw, saving cost .
4.Drying system: using heat conduction oil furnace as heat source, the hot oil will be exchanged to hot air by the fin type heat exchanger, then the hot air enters the drying room through the fan, to work together with the heat conduction oil pipe to dry the gypsum board. Â There are totally 3 drying zones, can perfectly finish the drying curve, avoid the over-burning or not dry enough. This technology is environmental, energy saving, high thermal efficiency, process parameters and is easy to control.
5. High electrical automation degree, low failure rate, less workers.
6.Forming system: forming belt 14mm thick, can improve the flatness of gypsum board. The wet board cutting machine uses frequency conversion code cutting technology, so can ensure the length tolerance to be mm.
Â
Labor requirements
| System | Workers needed |
| Dosing.mixing material system | 2/ Â 1workers/shift |
| PLC control | 1/ Â 1workers/shift |
| Forming system | 1/ Â 1 worker/shift |
| #2 #1Horizontal conveying system | 1/ Â 1 worker/shift |
| Drying system | 1/ Â 1 worker/shift |
| Boiler heating system | 2/ 1 worker/shift |
| Substitute person | 1Â 1 worker |
| \Â Monitor\Â forklift | 2/ Â 2Â worker/shift |
| Package | 3-5Â 3-5Â worker |
| Total | 13-15/ Â 13-15workers/shift |
Â
Company introduceÂ
Products
Shandong Yurui International is specialized in designing and manufacturing gypsum board production line, mgo board production line, lightweight EPS cement wall panel production line.
Experience
Our general engineer has over 20years experience in mechanical industry, proficient in the newest machinery design/manufacturing. Other main engineers all have over 10years experience .With rich experience in mechanical design and manufacturing, professional import and export services, we commitment to provide the best integrated solutions of production line for customers.
Promise
After installation and commissioning, we will provide technical formula suitable with client's demand, ensuring clients can produce qualified finished products. Additionally, we will help local experienced engineers for one year to master the production process.Our professional sales team, designing team, manufacturing team, installation team, process team, service team, promises you a 100% perfect project.
Shandong Yurui International is specialized in designing and manufacturing gypsum board production line, mgo board production line, lightweight EPS cement wall panel production line.
Experience
Our general engineer has over 20years experience in mechanical industry, proficient in the newest machinery design/manufacturing. Other main engineers all have over 10years experience .With rich experience in mechanical design and manufacturing, professional import and export services, we commitment to provide the best integrated solutions of production line for customers.
Promise
After installation and commissioning, we will provide technical formula suitable with client's demand, ensuring clients can produce qualified finished products. Additionally, we will help local experienced engineers for one year to master the production process.Our professional sales team, designing team, manufacturing team, installation team, process team, service team, promises you a 100% perfect project.
Â
Our Service
1. Full life-cycle value services: Our company provides gypsum board production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support
2. All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.
1. Full life-cycle value services: Our company provides gypsum board production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support
2. All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
3.Complete data specification:Â Provide production line equipment technical data and instructions,
4. Quality commitment: The company regards product quality as the lives of enterprises, the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology.so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.
Â
Â
Wall-Traveling Jib Cranes provide long lateral movement of materials without taking up floor space or interfering with large overhead cranes. Wall-traveling jibs increase overall plant productivity by quickly handling smaller lifts.
You can cover an entire series of workstations using one agile wall-traveling crane for virtually the entire length of your building.
Wall-Traveling Jib Cranes are cost-effective, custom-engineered solutions that are specifically designed to meet your production needs and building specifications.
WALL-TRAVELING Jib Crane FEATURES
- Jib boom is fabricated from standard [S" beam with vertical angle truss to reduce deflection; jib boom and truss bolt onto the back frame-no welding needed
- End trucks are constructed from channel beam frames and resist twisting; the end trucks are jig-fixed for optimal fit and travel. End trucks bolt onto the jib`s back frame
- Top-running end trucks include double-flanged Crane Wheels made from forged steel for long service life
- Crane drive has an electric motor with worm gear reducer
- Two-speed controls include mainline contactor, control transformer, inverter acceleration control, and fuses in NEMA 3R, 4, or 12 enclosures
- Variable frequency drives for multi-speed operation
Wall Travelling Jib Crane,Jib Crane,Wall Mounted Jib Crane,Jib Hoist
Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com