Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>>Â Household Water Supply
>>Â Water Supply System
>>Â Cooling System
>>Â Boost System
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.Â
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                               Â
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.Â
Besides, thermal protector in motor will interrupt current when motor overheats.


                                                                    Â
Model | HP | W | Current (A) |
Capacitor (uf) |
H.Max (M) |
Q.Max (L/min) |
Pipe Size | Pressure Set (bar) |
Tank  (L) |
KJ-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
KJ-250A | 0.35 | 250 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
KJ-370A | 0.5 | 370 | 2.4 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
KJ-550A | 0.75 | 550 | 3.5 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
KJ-750A | 1 | 750 | 4 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
KJ-1100A | 1.5 | 1100 | 4.8 | 25 | 62 | 66 | 1.5"X1.5" | 3.2 | 2 |



Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>>Â Household Water Supply
>>Â Water Supply System
>>Â Cooling System
>>Â Boost System
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.Â
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                               Â
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.Â
Besides, thermal protector in motor will interrupt current when motor overheats.


                                                                    Â
Model | HP | W | Current (A) |
Capacitor (uf) |
H.Max (M) |
Q.Max (L/min) |
Pipe Size | Pressure Set (bar) |
Tank  (L) |
KJ-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
KJ-250A | 0.35 | 250 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
KJ-370A | 0.5 | 370 | 2.4 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
KJ-550A | 0.75 | 550 | 3.5 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
KJ-750A | 1 | 750 | 4 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
KJ-1100A | 1.5 | 1100 | 4.8 | 25 | 62 | 66 | 1.5"X1.5" | 3.2 | 2 |



Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Experts recommend breathing with your nose
Recently, respiratory diseases have been "stable" in the first place among the patients treated. Professor Tong Zhaohui, deputy director of the Institute of respiratory diseases, Beijing Chaoyang Hospital, said that winter and spring were the high incidence seasons of respiratory diseases such as acute upper respiratory tract infection, influenza and acute pneumonia. The high temperature provided many favorable conditions for many pathogens, and the breathing system was most susceptible to pathogens, so in warm winter, Respiratory infections will increase. In addition, the dry weather brought by warm winter also contributed to the fire.
"It's bad for human health if it doesn't snow." Mei Xue, deputy chief physician of the emergency department of Beijing Chaoyang Hospital, said that the air is dry, and people are prone to dry lips, bleeding nostrils and itchy throat.
Research shows that when the air humidity reaches 45% - 65%, it is conducive to the treatment and rehabilitation of lower respiratory tract diseases. When the air humidity is lower than 40%, the respiratory mucosa of nose and lung will be dehydrated and the elasticity will be reduced, making dust and bacteria easy to adhere to the mucosa, stimulating the throat, causing cough, pneumonia and asthma. Snow can purify the air and eliminate pollution. If it doesn't snow, it is easy to have multiple respiratory diseases such as asthma and pneumonia.
Experts suggest that when you go out in dry days, you must keep warm and pay attention to the temperature difference between indoor and outdoor. The indoor temperature should not be too high. The room temperature should be about 18 ℃ and the relative humidity should be controlled at 30% to 40%. For the elderly with respiratory diseases, it is best to wear masks when going out. In the weather with high air pollution index, outdoor activities should be reduced. It is recommended to breathe with your nose. Your nose can "humidify" the air, so as to purify the air and reduce the invasion of bacteria. Wash your hands more. When you go home from outside, you must wash your hands well with soap. In addition, we should also pay attention to drink more water, strengthen exercise, and ensure adequate sleep and nutrition
Experts suggest that in a dry environment, Aroma Diffuser can be used to alleviate air drying, moisturize the skin and solve the problem of drying
Ultrasonic air diffuser, Air diffuser portable, Aroma air diffuser, Air freshener diffuser, Air waterless diffuser
Shenzhen Ewong Technology CO.LTD , https://www.ewongteches.com