Manufacturers Flat Die Biomass Sawdust/Straw/Rice Husk Wood Pellet Mill
1. Introduction:
This system pellet machine is suitable for making biomass particles such as sawdust, rice husk, paddy straw, sunflower stalk, hulls, forestry wastes pellet, etc. It has been installed with the KAF gear reducer and electrical control box. It also can make the corn, oil cake for the feed stuff, which it could be feed pellets for the fish, chicken, animal, etc.
2. Descriptions:
1). Use Cold-pressing molding technology, polishing integer process.
2). High output, low consumption and noise, better stability and lower fault rates, improved Fatigue resistance, continuous production, economy and durability.
3). It adopts special high quality materials and advanced even shaft transmission, Key components are made of high quality alloy steel adds wear-resisting material, Using heat treatment, Service life can be extended 5-7 times.
3. Working principle
The raw material is under dried condition, which is compressed, and formed into small eraser-sized bits, the final pellets is clean, pleasant and smooth, and its density is more than 1.0 g/cm3.
Normally we have to stop the pellet machine to fill the grease into rollers manually when the machine works for every 2 hours, it is inconvenient for making Pellets constantly. So we have designed the auto lubrication system for all bearing of rollers to improve efficiency without stopping the machine, So far, we just use the auto lubrication system for model KAF 350,400,450, 550 pellet machine.Â
4. Technical data
Model |
Capacity (kg/h) |
Motor (KW) |
Pellet Size (mm) |
Pellet density  (g/cm3) |
Dimension (m) |
Weight (kg) |
KAF-200 |
80-120 |
7.5 |
6,8 |
1.0-1.3 |
1.15* 0.5* 0.8 |
320 |
KAF-250 |
100-150 |
15 |
1.25* 0.6*Â 0.85 |
400 |
||
KAF-300 |
200-300 |
22 |
6,8,10 |
1.3* 0.6*Â 0.9 |
550 |
|
KAF-350 |
300-400 |
30 |
1.65*1*1.3 |
850 |
||
KAF-450 |
450-550 |
45 |
6,8,10,12 |
1.8* 1* 1.65 |
1300 |
|
KAF-550 |
500-800 |
55Â |
2*1.1*1.8 |
1600 |
||
KAF-800 |
1200-1500 |
90 |
2*1.1*1.9 |
3500 |
||
KAF-1000 |
1500-2000 |
110 |
2.2*1.25*2.05 |
5000 |
      Â
5. working parts:
6. Pellet production flow:
7. Pellet machine in pellet line
1)We can provide you the one year warranty but without the spare parts.
2) The professional and timely 24 hours after-sale service.
3) The relative vedio of the machine installation and instruction will be provided for you.
4) We can provide you the different mould to meet your different requirements.
5)We can also meet the special voltage demend.Â
6) Â The engineer is availiable to service machinery overseaÂ
7. Quality assurance:
A  All the parts and spare-parts of the machines are new.
B  The warranty is 12 monthsÂ
C Owing to the design/material/ processing problem, we can change the spare-parts as free.
D  If the problems caused by the user,we can repaire the machines, and the user should pay for this .Â
Â
FAQQ: why choose us?
A:We are the professional manufacturer, which has abundant experience of the machine, also we own research and development team.
Q:i know little for this machine, what should i do ?
A:please tell us your requirement: we will offer the most appropriate model for you.
Q:if the machine has a little mistake when produce and can not solve, what should i do?
A: please contach us immediately, by email, SKYPE, or telphone.our worker will give you the solution.
Place order or send inquiry we would like to know the following information:
-What is your raw material?
-Capacity per hour you need?
-What's the size of your raw material(length and diameter)?
Â
The Submersible pump is a multistage Centrifugal Pump. It is suitable for 41/2 "and the above casing. At 50 hertz, the displacement range is 20-3000m3/d. The variable frequency device can be used to get a larger displacement. The advanced CAD design is used for the guide wheel of the submersible pump. The single stage lift and efficiency are high. Users only need to provide the pump performance, such as flow rate, lift and efficiency, and so on, and then get a * * * * product. At the same time, we can use different materials to make pump grade according to the well condition. Nickel alloy cast iron, high chromium wear resistant cast iron, copper aluminum alloy, stainless steel, all kinds of materials can be selected arbitrarily, can provide high sand, high gas well pump according to the customer's requirement.
Our company has become the main design and production plant of international Electric Pump and leaf guide wheel.
Submersible Electric Pump,Petroleum Submersed ,Water Pump,Electric Pump
Tianjin RongHeng Group LLC , http://www.ronghenggrouppump.com