The Effect of Device Condition of LWGY-50 Turbine Flowmeter on Its Measurement Accuracy

The device status of the LWGY-50 turbine flow meter has a great influence on its measurement accuracy. Therefore, the device must be strictly requested to operate in the process of the device, so as to prevent the accuracy error from affecting the work quality.

LWGY-50 turbine flow meter

1. In industrial measurement, the normal request for turbine flowmeter upstream 20D, downstream 5D straight pipe length, this ability to ensure the accuracy of the completion. At the same time, the addition of a rectifier at the upstream end eliminates the problem of uneven distribution of the velocity and secondary activity, so that the measurement accuracy can reach the accuracy level of the calibration.

2. An air eliminator should be installed upstream of the flow meter when necessary. Regarding the easily vaporized liquid, a certain back pressure must be ensured downstream. This will not allow air or steam to enter the flowmeter, thereby ensuring that the fluid passing through the flowmeter is single-phase.

3. Before the flowmeter, it is better to install a filter. A funnel type filter can be used to ensure the cleanliness of the filter. The differential pressure at both ends of the filter can be measured.

LWGY-50 turbine flow meter

Cast Grinding Media

High Chrome Casting Balls,High Chrome Iron Balls,High Chrome Casting Steel Balls,Casting Balls For Cement Mill

SHANDONG SHENGYE GRINDING BALL CO., LTD , https://www.shengysteelball.com