Performance and Features:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Has connector to foot control, convenient for workers'Â operation.
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
- High duty cycle, may work continuously with high current.
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification
Â
|
Model Item      |
TIG 315P AC/DC |
| Voltage(V) | AC415V ±15% |
| Frequency(Hz) | 50-60 |
| Input Power(KVA) | 8.3 |
| No-load Voltage(V) | 54 |
| Current Range(A) | 10-315 |
| Rated Duty Cycle | 60% |
| Applied Welding Rod(mm) | ¢1.6-5.0 |
| Pre-flow time(S) | 2 |
| Post-flow time(S) | 0-10 |
| Down slope(S) | 0-10 |
| AC Balance(%) | 20-80 |
| AC Frequency(Hz) | 60 |
| Pulse Frequency(Hz) | 0.5-300 |
| Power Factor | 0.93 |
| Efficiency(%) | 85 |
| Insulation Grade | F |
| Housing Protection Grade | IP21S |
| Weight(Kg) | 30 |
| (L*W*H)(mm) | 535*360*460 |
| Carton CBM(m3) | 0.172 |
| Specification | |
| Â Capacitor | 470Uf/400V*6 |
| MOSFET | K3878*24 |
| Output Rectifier | D92-02*24 |
          FRONT VIEW
           ACCESSORYÂ
           LEFT VIEW
            RIGHT VIEW
           TOP VIEW
   BACK VIEW
 Â
Performance and Features:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Has connector to foot control, convenient for workers'Â operation.
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
- High duty cycle, may work continuously with high current.
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification
Â
|
Model Item      |
TIG 315P AC/DC |
| Voltage(V) | AC415V ±15% |
| Frequency(Hz) | 50-60 |
| Input Power(KVA) | 8.3 |
| No-load Voltage(V) | 54 |
| Current Range(A) | 10-315 |
| Rated Duty Cycle | 60% |
| Applied Welding Rod(mm) | ¢1.6-5.0 |
| Pre-flow time(S) | 2 |
| Post-flow time(S) | 0-10 |
| Down slope(S) | 0-10 |
| AC Balance(%) | 20-80 |
| AC Frequency(Hz) | 60 |
| Pulse Frequency(Hz) | 0.5-300 |
| Power Factor | 0.93 |
| Efficiency(%) | 85 |
| Insulation Grade | F |
| Housing Protection Grade | IP21S |
| Weight(Kg) | 30 |
| (L*W*H)(mm) | 535*360*460 |
| Carton CBM(m3) | 0.172 |
| Specification | |
| Â Capacitor | 470Uf/400V*6 |
| MOSFET | K3878*24 |
| Output Rectifier | D92-02*24 |
          FRONT VIEW
           ACCESSORYÂ
           LEFT VIEW
            RIGHT VIEW
           TOP VIEW
   BACK VIEW
Â
Panasonic provides extremely dependable electronics assembly equipment in the areas of SMT (surface mount technology), PTH (pin through-hole), and processes involving microelectronics back-end packaging of any-mix circuit manufacturing. We offer first-class equipment ranging from screen printers and dispensing, through component placement and inspection, up to axial and radial insertion, die bonding, die attach and flip chip. Our equipment is used all around the world to enable the production of the most modern technology.
Our variable machines in modular format support a large range of technologies and, from the installation of just one machine through to assemblies of over 1,000, can take care of processes such as, COB (chip on board), SOP (system on package), epoxy die attach, POP (package on package), 3D packaging, TS (thermo-sonic) and TC (thermo-compression) processing, plasma RIE surface cleaning, plasma ICP etching, and thin wafer plasma dicing. To perform odd-form placement and end-of-line work, we also offer automated equipment.
Panasonic Smt Machine,Panasonic Chip Mounter,Smt Panasonic Machines,Panasonic Smt Equipment
Shenzhen Keith Electronic Equipment Co., Ltd. , https://www.aismtks.com