Model NO.: HLLA
Application Fields: Food Processing
Application Machine: Machining Center
Certification: CE
Condition: New
Application: Industry Use
Cooling Capacity: 9.2-142.2kw
Refrigerant: R22,R407c
Power Supply: 380V-3-pH-50Hz
Evaporator: Shell and Tube Type
Cooling Range: 20~40 Degree
Chilled Water Range: 5~20 Degree
Dimension: 3200*1180*2200
Weight: 130~1280kg
Trademark: HUALI
Transport Package: Wooden Case
Specification: CE
Origin: Dongguan, Guangdong
HS Code: 8418692090
Popular Industrial Air Cooled Scroll Water Chiller for Extrusion Â
| Description of Industrial chiller |
| 1. The chiller adopt high-quality compressor and Italy pump, so it is very sate and noiseless, economical in power and durable 2. The chiller is deployed with Italy temperature controller, it can control the temperature between 3 and 35 degrees exactly 3. The designs of chiller and radiator are unique, so the heat exchange efficiency is very high 4. The chiller is designed to be with current over-load protector, high voltage and low voltage construction and electric time-delay safeguard, when malfunction happened, it could alarm and show the cause of the problem in time. 5. It has stainless steel temperature-holder box, it is very convince to purify 6. It is designed to be with anti-phase & lack-phase protector and anti-icy protector 7. The temperature of ultra cod chiller can be below -15 degrees. 8. This series chiller can customize base on the requirement of acid resistant & acidity-resistant 9. It has got CE certification. |
| Parameter of Industrial Air Cooled Chiller | |||||||||||||
|  Model HLLA ~ | 03SI | 05SI | 08SI | 10SI | 12.5SI | 15SI | 20DI | 25DI | 30DI | 40TI | 45TI | ||
| Rated Cooling Capacity | ×1000 kcal/h | 7.9 | 12.8 | 20.8 | 27.9 | 32.3 | 40.8 | 55.7 | 64.7 | 81.5 | 97.0 | 122.3 | |
| KW | 9.2 | 14.9 | 24.2 | 32.4 | 37.6 | 47.4 | 64.8 | 75.2 | 94.8 | 112.8 | 142.2 | ||
| Input Power (KW) | 3.85 | 5.55 | 8.15 | 10.4 | 12.0 | 16.0 | 20.1 | 22.5 | 31.2 | 33.7 | 45.7 | ||
| Comp. Input Power×Qty. (KW) | 2.6 | 4.3 | 6.35 | 8.1 | 9.3 | 12.5 | 8.1×2 | 9.3×2 | 12.5×2 | 9.3×3 | 12.5×3 | ||
| Â Chillded Water Pump Model | HT1.0DK-20 | HT1.0DK-20 | HT40-15 | HT40-15 | HT50-17 | HT50-17 | HT50-17 | HT50-17 | HT65-19 | HT65-19 | HT65-19 | ||
|  Chilled Water Pump Power (KW) | 0.75 | 0.75 | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 2.2 | ||
| Â Comp. Current (A) | 6.8 | 10.5 | 14 | 17.5 | 20 | 25.6 | 33.8 | 37.2 | 49.8 | 55.8 | 72.6 | ||
| Power Supply | 3φ-380V-50HZ | ||||||||||||
|  Safety Protection | Phase reversion protection, Phase lack protection, Overload current protection, Discharge air temp. protection, Low & High pressure protection, Low temp. protection, Water flow protection, |
||||||||||||
| Â Number of Refrigeration Circuit | 1 | 2 | 3 | ||||||||||
| Â Capacity Control (%) | 0, 100 | 0, 50, 100 | 0, 33, 66, 100 | ||||||||||
| Â Refrigerant | R22 | ||||||||||||
| Â Condenser | Ripple Aluminum Fins around Cooper Pipe | ||||||||||||
| Â Power lnput of Fan (KW) | 0.5 | 0.5 | 0.7 | 1.2 | 1.2 | 2.0 | 2.4 | 2.4 | 4.0 | 3.6 | 6.0 | ||
| Â Evaporator | Pipe Coil Type | Â Shell and Tube Type | |||||||||||
| Â Water Side Max Pressure (MPa) | - | 1 | |||||||||||
| Â Dia.of Pipe to Evaporator (inch) | 1" | 1-1/2" | 2" | 2-1/2" | |||||||||
| Â Chilled Water Flow (L/m) | 26.4 | 42.7 | 69.4 | 92.9 | 107.8 | 135.9 | 172.0 | 194.8 | 272.2 | 292.2 | 408.3 | ||
| Â Evaporator Water Pressure drop (kPa) | - | 17 | 23 | 28 | 30 | 28 | 28 | 32 | 32 | 31 | |||
| Â Running Noise dB(A) | 72 | 72 | 73 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | ||
| Â Tank Volume (L) | 80 | 80 | 180 | 180 | 180 | 180 | 270 | 270 | 270 | 270 | 270 | ||
| Â Total weight (Kg) | 130 | 170 | 430 | 480 | 510 | 560 | 840 | 880 | 980 | 1130 | 1280 | ||
|  Dimension L×W×H | 1000×650×1500 | 1500×1100×2200 | 1500×1180×2200 | 2200×1180×2200 | 3200×1180×2200 | ||||||||
| Photos of Industrial air cooled water chiller |
 Â |
| HUALI CLIENTS&CERTIFICATES |
 Â |
| FAQ |
| Q1: Could you help us to recommend the model for our project? A1: Yes, we have engineer to check the details and make the scheme for you. Based on the following: 1)Cooling capacity; 2) Refrigerant; 3) Ambient temperature; 4)Voltage; 5) Be used for what industry? 6)Any other special requirements? Q2: How to ensure your product with good quality? A2: All our products with CE certificate. And use the well-know brand accessories, such as copeland,danfoss compressor, also can be customized. The units will be tested before package and the Qualified rate is up to 99.9%. Q3: What's the warrenty? A3: 1 year warrenty for free if confirmed by both side damage in the quality reason. Q4: Are you a manufacturer? A4: Yes, we have more than 10 years in water chiller business. Also have patent on the water chiller appearence. The control box design make the unit safety and stably. Q5: How can I place an order? A5: Contact us via made in china /Email/Mobile for further informations on the chiller. |
| Contact |
| Ophelia Mob.: 0086-18028288791 Â |
Shaft sleeves are applied in order to protect the shaft respectively the running surface of the shaft seal from damage or abrasive wear.
Shaft sleeves or tube fittings we made are mostly sold to North America, Europe, Japan, etc.
OD Dimensions from 1" to 16"
Precision: +/- 0.0005"
Material: carbon steel, grey iron, ductile iron, aluminum, stainless steel
Surface treatment: blackening, zinc plating, powder coating, painting, oiled, etc.
All of our cooperators are large bearing companies, mower companies or agricultural equipment companies.
Because of the long term cooperation, we could supply our customers not only the products but also our recommendation on the designs to saving costs.
To meet your demand, we are a manufacturer, also we are a designer.
Micro Shaft Sleeve,Bearing Shaft Sleeve,Tube Elbow Fitting,Stainless Steel Tube Fittings
SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com