Slitting Line Machinery, Slitting Machine, Simple Slitting Line

slitting line machinery, slitting machine, simple slitting line


Description of the whole machine line

Simple steel coil slitting line is used for slitting the carbon plate to prepare for the next process.
1.Hydraulic coil car
The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
It is driven vertically by hydraulic cylinder with four guide pillars.
The level movement is driven by cycloid motor.
The capacity of it can reach to 15Tons(MAX)
 
2.Hydraulic cantilever de-coiler
Support the steel coil and de-coiling. And is equipped with the supporting stand
It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils.
Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
 
3. Slitting machine
Power part: This is composed of power-stand, decelerator,45KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, etc.  
Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot(φ200mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device, accompany of blade, shim, rubber band and so on
It change the blades through moving out the bracket hydraulically and is very convenient and fast

4.Scrap winder
It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and motor.
 
5.Tension stand
It consists of the frame, pre-dividing device, press and tension device and guide rollers and so on. And it is used to adjust the tension of pre-divide and recoiler to make sure the even and tight quality.


6. Recoiler
It adopts the hydraulic expand and shrink recoiler shaft to tight the inner hole of coils
it uses the hydraulic movable arm with the supporting spacers to ensure the even recoiling quality.
It is equipped with the push device to help unload the coils
The motor is DC 80KW with controller to ensure the recoiling.
 


  
Installation
If need, the seller will supply the technicians to do the installation for the whole line. It needs 2 or 3 technicians, the round tickets as well the accommodation for these technicians all should be covered by the buyer. And also should pay them USD 60 per day per person.
VI. Other terms
1.Spare parts: 20 pieces blades(200x340x20) ,and 30 pcs spacers, a complete of oil pipe.
And shim and the rubber band as well as the separating rubber band will be random delivered with the knife pivot and dividing device.
2. If there is any need of extra purchasing or changing beyond this quotation, the cost is an extra.


Pls contact with us for more details.
 








 

    The belt conveyor is widely used in such industries as of metallurgy, mining, coal, harbor, power station, building materials, chemical engineering, light industry, petroleum, grains, heating, etc.
Conveyor is adaptable to both stationary and mobile crushing plants, it is widely used in mining, metallurgical, and coal industry to transfer sandy or lump materials,  or packaged materials.  The transfer system can be one single or multi-conveyors or combined with other transfer equipments according to various transferring requirements.

Belts Conveyor Series

Rubber Conveyor Belt,Tunnel Belt Conveyor,Conveyor Belt Pulley,Steel Belt Conveyor

Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrusher.com