It is very important to carry out daily inspection and replacement of various accessories in the garbage truck. It can improve the working efficiency of the garbage truck and prolong its service life, and it can prevent some risks from occurring. For maintenance-based, as the case of repairs; seven maintenance, three points to repair these new ideas have gradually been accepted by the majority of garbage truck owners. Here's to tell everyone about the daily inspection of garbage trucks .
The first thing to do is to check all the luminaires and warning devices, including reversing alarms and filling cues, and repair or replace them in time if a fault is found. The second is to regularly check the link of the garbage truck wiring harness, as long as the method is to visually check, to see if the garbage truck harness has cracking, loose, poor contact.
It is necessary to regularly check the tire pressure of the garbage truck and the wear of the tread pattern. If the nuts are loose, the inspection cycle is preferably performed once a week. The inspection method is visual inspection, and then let the garbage truck run up again to see if there is any deviation or drifting. If there is any of the above conditions, it must not be used recklessly or if there is a safety incident during the driving process. At this time, we must check the four-wheel-bit position of the garbage truck and the dynamic balance check. Of course, this must be done after the sale of the garbage truck manufacturer. After passing the straight road test, it can continue to travel on the road. Also check the condition of the oil and brake oil of the garbage truck once a week, and add and replace them in case of any shortage.
Always pay particular note is that garbage truck brake system, garbage truck brake is generated by friction braking effect. After a long period of use, the brake system of the garbage truck will be mixed with water and sediment and other impurities, resulting in a sharp decline in friction coefficient, so the braking effect will be reduced. During the course of driving and there may be a safety accident, resulting in the loss of life and property.
The above is a brief introduction to the routine inspection of garbage trucks. In daily life, we must strictly perform the inspection and maintenance of the parts mentioned in the article so that no problems can arise during the driving process. (Wen/Jun Xun)
1.5 Ton Electric Reach Stacker
Zowell 1.5 ton reach stacker is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets. They are usually battery driven and used for transportation of large goods. The electric reach stacker/truck combines the advantages of counterbalance electric forklift and stacking truck, which has the characteristics of environmental protection, energy saving, low noise, high lifting and working in limited space.
Detail features
1. Front moving function
The gantry can move forward 580cm which can reduce the turning radius of the
truck as well as ensure its running stability.
2. The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.
3. This reach truck adopts an original multifunctional handle from Frei, Germany. The operation is comfortable and the functional buttons can realize precise control.
4. Side loading and unloading of storage battery
The side door of the truck and battery cover can be opened, then the battery can
be removed from the side door. So the changing and maintenance of the storage
battery is convenient. There are optional batteries such as FAMM, GS, HOPPECKE,
Trojan.
5. Multipath valve stem control
Different valve stem has different functions such as fork lifting/descending,
fork tilting forward/backward, gantry moving forward/backward. The distribution
of valve stem is compact. The operator can carry out operation with only one
finger, realizing precise control.
6. The ZF driving unit is imported from Germany. It adopts vertical installation. It also delivers superior performance, stability, and reliability.
7. Emergency power-off switch: the power can be rapidly cut off in emergencies to ensure safety.
8. Multifunctional meter can display failure code, electric quantity and some other information. The operators can know the running condition of the truck via the meter.
Reach Stacker Machine,Reach Stacker Spreader,Reach Stacker for Sale,Reach Stacker Truck
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com